News

1. Introduction to A36 steel plate   ASTM 36 is the American standard carbon structural plate,   2. Implementation standard of A36 steel plate   Implementation standard ASTM A36/A36M-03a, (equivalent to ASME specification)   3. Use of A36 steel plate   This standard is applicable to riveted, bolted and welded structures for bridges and buildings, as well as carbon steel sections, steel plates and bars of general structural steel quality. The yield value of A36 steel plate is around 240MP, and its yield value will decrease with the increase of material thickness. Due to its moderate carbon content, it has good comprehensive performance, and its strength, plasticity and welding properties are well matched, and it has the widest application.   4. Impact test of A36 steel plate   The impact toughness test uses Charpy V-notch specimens. The impact toughness index is Akv. For the above-mentioned B, C, and D grade steels, Akv≥27J is required at their respective different temperature requirements. At different impact temperatures, ASTMA36 is an American standard carbon structural plate, and the implementation standard is ASTM A36/A36M-03a.   5. The main chemical composition of A36 is as follows:   6. Mechanical properties of A36:   7. Application range:   A36 is a plate and profile, which is widely used in structures such as brackets and legs. It is suitable for riveting, bolting and welding structures for bridges and buildings, as well as general-purpose structural steel quality carbon steel sections, steel plates and bars.   8. A36 steel plate spot details   Product name Material Thickness (mm) Width (mm) Length (mm) Tonnage   American standard steel plate A36 steel plate 8 2200 10000 1.433   American standard steel plate A36 steel plate 8 2200 10000 1.433   American standard steel plate A36 steel plate 8 2200 9000 1.29   American standard steel plate A36 steel plate 8 2100 8500 1.163   American standard steel plate A36 steel plate 10 500 4000 0.157   American standard steel plate A36 steel plate 12 2300 11600 2.587   American standard steel plate A36 steel plate 14 2200 12000 2.974   American standard steel plate A36 steel plate 14 2000 10000 2.253   American standard steel plate A36 steel plate 14 2300 11000 2.85   American standard steel plate A36 steel plate 14 2400 11600 3.136   American standard steel plate A36 steel plate 16 2500 8900 2.873   American standard steel plate A36 steel plate 16 2200 11000 3.125

Plywood is a thin board with three or more layers, which is made by rotary cutting logs into veneers or planing wood into thin wood, and then gluing it with adhesive. Usually an odd number of layers of veneers are used, and the fiber directions of adjacent layers of veneers are aligned vertically and glued together. Therefore, there are odd number layers of plywood such as three-in-one, five-in-one, seven-in-one, etc. 1. Plywood not only has the advantages of wood, such as light weight, high strength, beautiful texture, insulation, etc., but it can also make up for some of the natural defects of wood, such as knots, small format, deformation, and large differences in vertical and horizontal mechanics. 2. Plywood production can make rational use of logs. Because it has no sawdust, every 2.2-2.5 cubic meters of logs can produce 1 cubic meter of plywood, which can be used instead of sawing about 5 cubic meters of logs into boards. For every 1 cubic meter of plywood produced, 1.2-1.5 cubic meters of residue can be produced. Rice, which is a better raw material for the production of medium density fiberboard and particleboard. Plywood has the advantages of small deformation, large format, convenient construction, no warping, and good horizontal grain tensile properties. Therefore, this product is mainly used in various panels for furniture manufacturing, interior decoration, and residential construction. Secondly, it is used in industrial sectors such as shipbuilding, carriage manufacturing, light industrial products and packaging. From a structural point of view, the outer veneer of plywood is called a panel, and the front panel is called a panel. It is made of good quality veneer. The front panel on the back is called the back panel, and is made of a single board with the next highest quality. The inner veneer is called the core board or the middle board, and is composed of poor quality veneer.

The so-called plywood refers to a three-layer or multi-layer plate material that is made by turning wood sections into veneers or planing wood into thin wood, and then gluing it with adhesive. It is a plate product often used in the modern decoration industry. Mainly used on furniture surfaces. Therefore, the maintenance of plywood becomes the maintenance of plywood furniture. How to maintain plywood furniture in daily life? First, use plywood to make furniture. Do not rinse it with water during daily cleaning to prevent the plywood from degumming. Generally, stains can be removed with detergent, and then wiped dry with a soft wet rag. In addition, there are other things to maintain in daily life when maintaining plywood furniture. You should pay attention to the following key points: 1. Plywood furniture should be placed steadily to prevent damage to the mortise and tenon structure. 2. Do not expose plywood to the sun to prevent deformation. 3. It should not be placed in a humid and unventilated place, otherwise it will easily expand and deteriorate due to moisture. 4. Do not place heavy objects on the top of large wardrobes and other furniture, otherwise the door frames may be easily deformed. 5. If there are cracks in the plywood furniture, mix putty and pigment evenly and then embed them flat to prevent the cracks from extending and expanding. 6. When cleaning the surface of plywood furniture, do not use alkaline water or boiling water to avoid damaging the paint surface. 7. If the surface of the furniture is stained with alkaline water or stains, wipe it clean with water in time, and then apply polish.

Among many man-made panels, plywood has always occupied an important position in the market with its advantages of reliable quality and low price. It is also very effective when used to make furniture, packaging boxes and other products. How can I choose suitable boards from plywood manufacturers? When we purchase plywood, we must pay attention to quality issues, so it is important to choose a plywood manufacturer with a good image. In this regard, we can choose manufacturers recommended by friends, or we can learn about them in the industry and from customers. The quality of the products of such manufacturers is relatively guaranteed. In addition to the choice of manufacturer, we also need to pay attention to production materials. Good raw materials may not produce good products, but products with reliable quality must use raw materials with reliable quality. Therefore, it is important to check the production materials on the label when purchasing. a feasible method. Nowadays, some new products often appear on the market. When they are sold, their performance will be marked. For this type of product, we can buy a small amount and try it out.

Boards are an issue that will be involved in the home decoration process. Today, with the continuous innovation of plate processing and plate production technology, the types of plates are increasing day by day. This certainly provides consumers with more choices, but the wide variety of decorative plates and environmentally friendly plates also makes people feel at a loss. Blockboard, multi-layer board, and veneer are common decoration and decorative boards. The following is a brief introduction to these three types of decorative boards. 1. Blockboard. Blockboard is a solid board composed of core board and surface board. The core board of the joinery board is made of spliced wooden slats, generally using the same tree species or tree species with similar properties. The moisture content of the core board of the blockboard is controlled between 6 and 12%, the width of the core strip is no more than three times the thickness, and no large cracks or holes are allowed. There are two panels in the joinery board. The one with better quality is called the front panel, and the other side is the back panel. The surface can be sanded on one side, on both sides, or on both sides. In special cases, appropriate repairs may be made to joinery panel surfaces. The process of joinery wood board makes full use of the scrap materials in wood processing. It is a construction board with large format, moderate thickness and uniform structure. 2. Multilayer board. Multilayer boards are sometimes also called plywood. They are similar to joinery boards in terms of manufacturing methods and material selection. Both multilayer boards and joinery boards are composed of several layers of boards, but they are different from joinery boards. The problem is that not all multi-layer boards have three layers, and each layer of the multi-layer board has the same thickness. Multi-layer boards have good structural strength and stability, and are mainly used in the production of wood products such as the bottom boards of decorative panels and the back boards of panel furniture. 3. Veneer board. The veneer is a kind of decorative board, including a pattern layer, a bottom paper layer, and a decorative layer. The three are bonded together by glue. The surface pattern of the veneer panel is beautiful and is very effective in decorating the living space.

What material is mdf board? 1. Its full English name is DensityFiberboard, abbreviated as mdf, or MDF for short. It is an artificial board made from wood fiber or other plant fibers as raw materials, which are broken, separated and dried, then urea-formaldehyde resin or other suitable adhesives are applied, and then hot pressed. Its density is generally in the range of 500-880 kg/cubic meter, and its thickness is generally 5-30 mm. 2. A type of medium-density fiberboard (artificial board). Logs are degreased and peeled, crushed into wood chips, and then molded under high temperature and high pressure. The density is very high, so it is called density board. Its surface is often covered with melamine or wood veneer. The advantages include excellent physical properties, uniform material, no dehydration problem, and no moisture deformation; the melamine finish on its surface is moisture-proof, anti-corrosion, wear-resistant, high-temperature resistant, etc., and does not require post-processing. The formaldehyde content Low. Since the raw materials are all very fine wood powder, from the perspective of moisture resistance, if a piece of medium density board is soaked in water, it will expand like bread. 3. The density of medium-density board is not as high as that of high-density board, but it is higher than that of low-density board. Common specifications are 2440mm*1220mm, and thicknesses include 3mm, 5mm, 9mm, 12mm, 15mm, 18mm, 25mm and other sizes. Medium density boards of other specifications and thicknesses can also be customized. Features of MDF board 1. Uniform internal structure, moderate density, good dimensional stability and small deformation. 2. The physical and mechanical properties such as static bending strength, internal bonding strength, elastic modulus, board surface and board edge screw holding force are superior to particleboard. 3. The surface is flat and smooth, which is convenient for secondary processing. It can be pasted with rotary cut veneer, sliced veneer, painted paper, impregnated paper, and can also be directly painted and printed for decoration. 4. The medium-density fiberboard has a larger format, and the board thickness can also vary within the range of 2.5~35mm, and the production can be organized according to different uses. 5. Good mechanical processing performance. The processing performance of sawing, drilling, tenoning, milling and sanding is similar to that of wood, and some are even better than wood. 6. It is easy to engrave and mill into furniture parts of various shapes and shapes. The processed special-shaped edges can be directly painted and finished without edge sealing. 7. Chemical agents such as waterproofing agents, fire retardants, and preservatives can be added to the medium density fiberboard production process to produce medium density fiberboards for special purposes.

Plywood is a kind of board made of multiple layers of thin wooden boards or particle boards that are hot-pressed and glued. It has the characteristics of stable structure, strong durability, water resistance, earthquake resistance, fire resistance, etc. It is widely used in construction, furniture, packaging, transportation and other fields. The main process flow of plywood: Log → Log sawing → Wood forging and peeling → Veneer peeling → Selection → Drying → Health → Grinding head splicing → Patchwork → Gluing → Cold pressing → Hot pressing → Sanding → Saw edge → Finished product → Inspection/packaging. The manufacturing methods of plywood can be divided into cold pressing method and hot pressing method. The cold pressing method refers to using dried veneers, coating them with glue, assembling blanks, and cold pressing to make plywood. Hot pressing method refers to the production of plywood by hot pressing from dried veneers. Of these two methods, the hot pressing method is widely used due to its high production efficiency and good product quality. Precautions for use 1. When using plywood, pay attention to whether the surface is flat and the edges are complete to avoid problems during use. 2. When storing plywood, the humidity must be kept away from being too high or too low to avoid distortion, cracking, etc. of the board. 3. During use, pay attention to the weight and thickness of the board and choose appropriate fixing and support methods. In short, plywood is a board product that is simple to produce and widely used. Its production process is simple and easy to learn, and the raw materials are easy to obtain. It has a wide range of applications in various fields.

What is Okoume wood? Okoume wood is a well-known tree species commonly found in Central Africa and some other parts of the world. Okoume wood is mainly used as plywood for the manufacture of furniture and similar items. The wood is made from the Ogum tree which is usually 100-130 feet tall. It has a straight to slightly wavy texture, which makes it look pretty but not very durable. There is an interesting history behind the origin and name of Okoume wood. It is an African hardwood tree that only grows in parts of Africa, including Central Africa (Gabon), and is sold worldwide. The tree has a huge trunk that can reach 6 feet in diameter. It's above average and growing quickly. Okoume Timber Plywood Characteristics: Quality, Dimensions and Thickness Okoume wood comes in two forms: logs and lumber. You can purchase these two types of wood directly from the wood cloud platform. While logs are standard rounds with custom lengths in feet, the lumber can be made into different shapes and sizes. Okoume plywood application: In what scenarios is it used? Plywood is used in a variety of wood products projects including furniture making, boat building and constructing attractive wood products/objects. It is most commonly used in the construction of boats and other lightweight wood products. Because of its natural beauty and luxurious appearance, it is also used to make kitchen cabinets and modern furniture. It is mainly used to build boats that are nearly waterproof. That said, wood is not completely waterproof and requires a layer of adhesive or glue to make it waterproof. Since it is a strong hardwood and bends easily, it is ideal for boat building. The lightness and attractiveness of Okoume wood also make it ideal for a variety of woodworking projects, including furniture making and kitchen cabinet renovations.

1. Construction field Commercial plywood is widely used in construction. Its excellent physical properties and moisture-proof and anti-corrosion properties make it a common material in the construction industry. Commercial plywood can be used for floors, walls, roofs, boards, formwork, and more. In construction projects, the use of commercial plywood can greatly improve the durability, strength and earthquake resistance of buildings. 2. Furniture manufacturing field Commercial plywood is also widely used in furniture manufacturing. Commercial plywood has excellent properties such as strength, durability and high flatness, making it one of the main materials in furniture manufacturing. Commercial plywood can be used for sofas, beds, cabinets, and more. Furniture made of commercial plywood as the main material is not only durable and beautiful, but also relatively affordable and deeply loved by consumers. 3. Packaging field Commercial plywood can also be used in the packaging field. Commercial plywood is pressure and impact resistant, making it a packaging material for valuables and fragile items. Commercial plywood is also moisture- and water-resistant, so it is also widely used in marine transportation. To sum up, commercial plywood has excellent properties such as moisture resistance, durability and high strength, and has been widely used in construction, furniture manufacturing, packaging and other fields. It is a very practical building material.

When purchasing plywood, you need to choose the appropriate tree species based on actual needs and budget. At the same time, it is necessary to pay attention to whether the appearance factors such as texture, color and gloss of the tree species meet the requirements. 1. Appearance inspection When choosing plywood, you must pay attention to the fact that the plywood plywood has both front and back sides. Carefully observe whether the wood grain of the plywood is clear, and also carefully check the front side of the plywood. The front side of the plywood is smooth, smooth and not rough. Smoothness and no lag are the quality. Good quality plywood. Of course, in addition to this point, the plywood should not have defects such as damage, bumps, bruises, knots, etc., and there should be no degumming. 2. Check the seams Observe carefully when purchasing. Many plywoods are made of two veneers with different textures pasted together, so be sure to pay attention to whether the seams between the two veneers are tight and whether there are any unevenness. 3. Check the adhesion When purchasing plywood, you must pay attention to the adhesion of the glue in the plywood. You have chosen to use plywood, so you can`t escape the glue anyway. The quality and adhesion of the glue must be good, right? When choosing plywood, pay attention to the kind of plywood that does not loose glue. You can try to knock various parts of the plywood with your hands. If the sound is brittle, it means that the quality of the plywood is good; if the sound is dull, it means that the plywood has loose glue, and you cannot buy this kind. 4. Pay attention to color coordination When purchasing plywood, pay attention to choosing one with similar wood grain color. It is best to coordinate the color of the board with the color of the furniture paint, which can reduce a lot of trouble during use. 5. Pay attention to environmental protection indicators This is still very important when purchasing plywood. No formaldehyde does not form glue. Although plywood will definitely contain formaldehyde, each manufacturer`s processing technology and the quality of the glue used are different. The final produced plywood releases formaldehyde. The content is also different. Choose plywood with low formaldehyde emission produced using environmentally friendly glue.